Input: Pulses - Mechanical contact, reed, NPN with 2 and 3 wires, PNP with 3 wires and 24 VDC power supply, Namur, Photoelectric, "HALL" sensor, and variable reluctance
Output: Current (0-20, 4-20 mA), Voltage (0-5, 1-5, 0-10, 2-10 VDC)

Power Supply:
Channels:
Accuracy:
Status Indicators:

Galvanic Isolation:
Hot Swapping:
Power Consumption:
Max Frequency:
Protections:
Protection for Inputs:
IP Protection:
Humidity:
Design:
Data Memory:
DIP Switch:

Enclosure:
Dimensions:
Weight:
Operating Temperature:
Connections:
Mounting:
Standards:


Approvals:

19 to 40 VDC, 19 to 28 VAC
1 Input / I Output
< 0.3% of Full Scale
Power
Off Scale
Power Supply, Input, Output (1500 VAC) - Digital
Yes
2.5 W
9.9 kHz
Surges: 400 W/ms. Loop Supply Short-Circuit Protected
Except Current: 60V Continuous; Current 200 mA Continuous
IP 20
30 - 90 % at +40 °C (non condensing)
Terminal Housing for Mounting on 35 mm DIN 46277
EEPROM for all configuration data; storage time: 10 years
Inputs Signal Setup
Output Signal Setup
"V0" self-extinguishing glass filled nylon case
17.5 x 100 x 112 mm (W x H x D)
140 g
0 to +50 °C
Plug-in screw clamp terminal blocks, wires up to 2.5 mm²
35 mm DIN 46277
EN50081-2
EN50082-2
EN61010-1
CE, UL-CSA